Product name: J24Y stainless steel angle needle valve
Material: Stainless steel
Product introductionJ24Y stainless steel angle needle valve model is J24Y-320P, nominal diameter is DN3-DN25, pressure is 40MPa-200MPa, valve body and high temperature parts are forged. J24Y stainless steel angle needle valve has the advantages of convenient installation and disassembly, fast connection, good for fire protection, high explosion-proof and pressure resistance, and good sealing performance.
不锈钢角式针阀 型号为 J24Y-320P ，公称口径为 DN3-DN25 ，压力是 40MPa-200MPa 阀门主体及高温付件均采用锻造，阀门符合低进高出的设计规范和流通形式。 J24Y stainless steel angle needle valve model is J24Y-320P , nominal diameter is DN3-DN25 , pressure is 40MPa-200MPa, valve body and high temperature parts are forged, and the valve meets the low-in-high-out design specification and circulation form. J24Y stainless steel angle needle valve has the advantages of convenient installation and disassembly, fast connection, good for fire protection, high explosion-proof and pressure resistance, and good sealing performance. Valve. 不锈钢角式针阀的密封性良好，使用寿命长，即使密封面损坏后，也只需要更换易损零件，即可继续使用。 J24Y stainless steel angle needle valve has good sealing performance and long service life. Even if the sealing surface is damaged, you only need to replace the vulnerable parts and you can continue to use it. Imported high temperature and high pressure needle valve has small structure, beautiful appearance, reliable performance, convenient and flexible use, standardization and high degree of generalization. It is widely used in automatic control systems of petroleum, chemical, power, medicine, metallurgy, aviation and other devices. Apply next-generation valves.
J24Y 不锈钢角式针阀主要参数： I. Main parameters of J24Y stainless steel angle needle valve:
J24Y-320P 1. Product model: J24Y-320P
DN3-DN25 2. Nominal caliber: DN3-DN25
:40MPa-200MPa 3.Pressure: 40MPa-200MPa
4. Main material: stainless steel
5. Applicable medium: oil, water, gas and other corrosive and non-corrosive media
6. Connection method: ferrule, welding, thread, flange
7. Driving mode: manual, pneumatic, electric
J24Y 不锈钢角式针阀产品特点： Second, J24Y stainless steel angle needle valve product features:
NRT Tip) 结构，使得阀芯与阀体之间无旋转磨损，阀芯与阀座仅存在上下运动，并保证每一次开关密封线位置不变，密封严密性强、阀门的寿命长。 1. Non-rotating valve core ( NRT Tip) structure, so there is no rotation wear between the valve core and the valve body, the valve core and the valve seat only move up and down, and ensure that the position of the sealing line of each switch remains the same, the sealing tightness is strong, The valve has a long life.
2. The special design of the crimping gasket nut makes the external seal more reliable and has no external leakage.
3. The connection thread between J24Y stainless steel angle needle valve spool and valve body is at the back of the gasket to prevent fluid from entering the thread area and ensure a good external seal.
4. Design of mounting holes for easy rack mounting, while providing panel mounting and nut design for easy panel mounting
J24Y 不锈钢角式针阀可靠的密封压盖螺母锁定装置，保证阀门在非正常工作下的安全运行。 5 , J24Y stainless steel angle needle valve reliable sealing gland nut locking device to ensure the valve's safe operation under abnormal work.
6. Sealed stuffing box nut squeezes the packing through the support washer to extend the life of the packing.
J24Y 不锈钢角式针阀的产品性能： Product performance of J24Y stainless steel angle needle valve:
1. Low design torque, which is light and easy to operate.
2. The raw materials of all major components are traceable.
PTFE 或柔性石墨密封压力装置，阀杆操作时无泄漏。 3 , PTFE or flexible graphite sealed pressure device, no leakage during valve stem operation.
4 , has a compact structure, beautiful appearance, flexible use, fast connection, good sealing performance.
5. Convenient installation and disassembly, tight connection, conducive to fire resistance, high explosion-proof and pressure resistance, and good sealing performance.
J24Y 不锈钢角式针阀的选用原则： Fourth, J24Y stainless steel angle needle valve selection principles:
1. For piping systems and devices of low-temperature media, low-temperature needle valves with valve covers should be selected.
2. On the piping system of the catalytic cracking unit of the refining unit, a lift-rod needle valve can be selected.
PEEK 为阀座密封圈的不锈钢针型阀。 3. For the devices and piping systems of corrosive media such as acids and alkalis in chemical systems , stainless steel needle valves made of austenitic stainless steel and PEEK valve seat ring should be used .
4 , metallurgical systems, power systems, petrochemical installations, urban heating systems in high-temperature medium pipeline systems or devices, metal-to-metal sealed needle valves can be selected.
V 形开口的调节针型阀。 5. When flow adjustment is required, a worm-driven, pneumatic or electric needle valve with a V -shaped opening can be selected .
6. For oil and gas transmission pipelines, those that need to be cleaned and buried in the ground, use needle valves with full diameter and fully welded structure; those buried in the ground, choose full diameter welding or flanged connections Ball valve.
7. Flange-connected needle valves are used for the transportation pipeline and storage equipment of refined oil.
8. For city gas and natural gas pipelines, needle valves with flange connection and internal thread connection are selected.
9. For oxygen pipeline system in metallurgical system, needle valve with flange connection should be selected after strict degreasing treatment.
J24Y 不锈钢角式针阀的订货须知： Five, J24Y stainless steel angle needle valve ordering instructions:
A: 产品名称、型号、公称通径 B: 介质及温度、压力范围 C: 是否有附件、交货期、特殊要求等以便我们的为您正确选型。 1. A: Product name, model, nominal diameter B: Medium and temperature, pressure range C: Whether there are accessories, delivery time, special requirements, etc. so that we can correctly select the model for you.
2. If the valve type of our company has been selected by the design unit, please order directly with our sales center according to the valve parameters.
, 请您提供设计图纸和详细参数，我们的工程师会专心为您审核与分析。 3. When the occasion you use is very important or the environment is complicated , please provide design drawings and detailed parameters, and our engineers will focus on reviewing and analyzing for you.
4. The above prices are all inflated. If you are interested, please contact us.
We can provide you with professional solutions, including design, customization, complete set, operation, and service.